Automatic Automatic Rear Air Suspension for RAM Trucks Promaster 2013>

  • Image
  • Image

Top Drive Air Suspension for Automatic Automatic Rear Air Suspension for RAM Trucks Promaster 2013>

Top Drive is a leader in Air suspension systems, this system includes an Assistive Air Spring, to help maintain minimum ride height and suspension travel.

  • TUV tested and approved
  • For Commercial vehicles and Motorhomes/Campervans
  • Increases suspension travel to maintain ride height
  • Can improve ride comfort and road handling (if set correctly)
  • Level off-centre loads
  • Can be installed with on-board compressor for height adjustments

Fitting Information:

<

Available for DIY, installation by local mechanic or by Conrad Anderson. Vehicle specific options available for switches and gauges - supplied with inflation kit. Airbag Kit with Twin Gauges includes a universal mounting plate.

Standard installation includes - compressor often mounted under the driver's seat, switches and gauges in either the seat base, step trim or rear of the vehicle, power directly from engine battery. Any variation is possible based on vehicle inspection.

Delivery: 15-21 Working Days
£895.00
I would like Conrad Anderson to fit this item (+ £288.00)

Top Drive Air Suspension for Automatic Automatic Rear Air Suspension for RAM Trucks Promaster 2013>

Top Drive Air Suspension is an ideal addition to any commercial van or motorhome which is consistently heavily laden. It is an air assist which will return the ride height to where the manufacturer intended it to be, rather than down on the bump stops. This means your suspension will last longer and save you money in the long run. The lift attained on the suspension positions the shock absorber at the optimum height and therefore improves damping.

Fitted with the comfort kit it allows the driver to adjust the ride height, this enables adjustment on the ride comfort, reduce vehicle roll and level off-centre loads.

This is a Air Suspension system for the Rear of a RAM Trucks Promaster 2013>

Specific vehicle information: N-A

The Air Suspension system grade is Automatic, with Automatic inflation

The Air Bag utilised is 6mm Torpress G279B 550041-550031

The Vehicle Axle type is Square 75x75

The Vehicle is FWD with SRW

  • Better stability
  • Spring force can be varied
  • Good Value
  • Body and load will be protected against damage
  • Heavy loads are no longer visible from the outside (less sagging)
  • Shock absorbers will work less and, therefore last longer

In the box

Base Kit:

Airbags, Brackets, clamps, nuts & Bolts, Pipes with Schrader valves and split conduit.

Inflation pack:

All of the above +
Compressor with brackets and fixtures
2x switches and gauges are supplied with a universal installation panel.

Fitting description

  • Access to rear axle and springs required.
  • Remove rear suspension bumpstop and install airbag using supplied U-bolt brackets and fixings.
  • Base kit and decide where schrader valves are to be positioned, this could be external, internal rear or in the cab area.
  • Inflation Kit - switches and gauges on the drivers seat base or step trim, the compressor is generally installed under the drivers seat. Some motorhomes have batteries and chargers in this location so an alternate location must be sought.
  • Run pipes to required location, add split conduit at any points where friction may occur
  • Inflation kit - Run battery cable with fuse and fuse holder to battery live connection.

Tools Required for installation

General Workshop tools
Method of gaining access to the underside of the vehicle, lifts or inspection pits willl make the job easier and quicker, but jacking the vehicle onto axle stands will surfice as long as you do not mind working on your back :-)

Skills Required

Some mechanical knowledge of the vehicle suspension.
Knowledge of compressed air system installation would help.
Pay attention to safety when lifting vehicles.

Will installing Top Drive Air Suspension affect the vehicle warranty?

Top Drive Air Suspension is fully TUV tested and approved for the vehicle (and all vehicles for which there is a Top Drive Air Suspension kit manufactured), as long as it is installed correctly it will not affect the vehicle warranty. If in doubt Conrad Anderson provide a professional installation service.