|
The
DW6040, a simple addition to the HughesNet terminal, provides the transport for
carrying telephony traffic via satellite to the HughesNet Network Operations Center
(NOC). In a typical configuration, a voice gateway at the NOC provides connectivity
to the PSTN. The standard H.323 protocol suite is used between the DW6040 and
the gateway for call setup and teardown. Implementing
the G.729AB 8Kbps voice codec with echo cancellation, voice activity detection,
and comfort noise generation, the DW6040 offers superior telephony quality. Facsimile
calls are supported using the T.38 fax over IP protocol to rates of 9.6Kbps. The
DW6040 also supports a flexible dialing plan. Optimized
for use with the HughesNet system, the voice appliance automatically reserves
bandwidth through the HughesNet network when each call is initiated. Additionally,
the DW6040 and the NOC components prioritize the associated voice stream to ensure
end-to-end toll-quality transmission of the call. The prioritization of voice
over data significantly improves the quality of service. The HughesNet system
also facilitates short call set-up timestypically less than four secondsand
low end-to-end delay inside the HughesNet network. Transmission efficiency is
further improved by compressing the voice packets. The
HughesNet NOC equipment routes the voice calls to the PSTN via an H.323 voice
gateway. The voice gateway performs the conversion from the H.323 protocol and
the PSTN signaling. The voice gateway provides an E1 interface to the PSTN. Multiple
voice gateways may be configured at the NOC. A gatekeeper provides the address
resolution between the DW6040 and multiple voice gateways. Alternatively, the
voice appliance facilitates international long-distance calling to any phone by
connecting, via the NOC, directly to a network of multiple Points of Presence
(POP) around the world. When integrated with technology from authorized VoIP service
providers, the DW6040 supports such advanced features as Interactive Voice Response
(IVR) and easy-to-use online account management. The
HNS Vision® Network Management System (NMS) provides monitoring and control
of the voice appliance, as well as the HughesNet terminal. Downloads of software
and configuration parameters are also performed by the NMS. |