| Dimensions |
Built
in dimensions (W x H x D): 448
x 525 x 492 mm (without door)
With standard frame: 452 x 527 x 492
mm
With flush-mounted frame: 474 x 527 x 540 mm |
| Gross
capacity |
approx. 64 litres/7.2-litre freezer compartment |
| Voltage
| 12/24
volts DC |
| Average
power consumption |
approx. 45 watts |
| Current
consumption |
1.6 Ah/h at 25°C ambient temperature
1.9 Ah/h at 32°C ambient temperature
both at 5°C interior temperature and -18°C in the freezer compartment |
| Insulation |
CFC-free polyurethane foam |
| System |
Fully hermetic Danfoss BD35F compressor with integrated control electronics, low-voltage
protection, electronic fuse/automatic reverse pole protection, dynamically ventilated
wire condenser, mechanical, continuously variable thermostat |
| Material |
Stainless steel fittings, plastic interior, plastic door frame, body with coated
metal frame |
| Colour |
Body and door frame: silver, door panel: mat silver (brushed stainless steel appearance) |
| Weight |
approx.
20 kg |
| Quality
features |
Interior light, door with magnetic seal, variable door mounts and locks right/left,
door with double lock (top/bottom) and dual function (locking/ventilation), separately
insulated *** freezer compartment, additional, foamed rear-wall evaporator in
the interior, easy-to-change decor panel |
| Test
marks |
TÜV/GS, e-approved according to 95/54/EC (EMC guidelines for vehicles)
|
|
Notes
and features |
Normal refrigeration and *** deep-freezing Tropical-rated
(equivalent to ISO 7371)
Condensation drainage via hose connection or collection tank
Separately insulated *** freezer compartment 4 mounting points for fastening from
inside Standard
or flush-mount installation frame available as accessory Products:
CoolMatic CR-0065E
Standard installation frame for CR-65: EST-0065E
Flush-mount installation frame for CR-65: EFM-0065E Optional
extra:
Mains adapter 110 – 240 V › 24 V: MPS-35 |
