Ducato/Boxer/Relay ALKO SemiAir Suspension 2004>

  • Image
  • Image
  • Image

VB SemiAir is an Assistive Air Spring, installed onto the swing arms via a bracket, to help maintain minimum ride height and suspension travel.

  • TUV tested and type approved for Alko Chassis
  • For Commercial and Motorhome/Campervan using Fiat Ducato 94-06 chassis
  • Increases suspension travel to maintain ride height 
  • Can improve ride comfort and road handling (if set correctly)
  • Level off-centre loads
  • Includes on-board compressor for height adjustments.

Fitting Information:

This product is available for installation by Conrad Anderson only, due to the AL-KO's chassis frame structure. Vehicle specific dash and seat base panel installed for switches and gauges - supplied with kit for X244/X250/290 front cab - Please specify on enquiry. Variations for single/twin axle and narrow/wide Alko Chassis.

Price on application - please contact us for pricing options.

£POA

The VB AL-KO SemiAir suspension kit is currently available for installation on the following vehicles:

  • Peugeot Boxer 2004>
  • Fiat Ducato 2004>
  • Citroen Relay 2004>

VB SemiAir is an ideal addition to any commercial van or motorhome which is consistently heavily laden. It is an air assist which will return the ride height to where the manufacturer intended it to be, rather than down on the bump stops. This means your suspension will last longer and save you money in the long run.

VB SemiAir kits use the maximum size of airbag available (given vehicle space constraints). The larger airbag reduces the internal air pressure and wear on the bag, enabling the unit to last far longer without replacement. The lift attained on the suspension positions the shock absorber at the optimum height and therefore improves damping.

The included compressor with paddle switches & gauges allows small adjustments the ride height, this enables adjustment on the ride comfort, reduce vehicle roll and level off-centre loads.

  • Better stability
  • Spring force can be varied
  • Good Value
  • Body and load will be protected against damage
  • Heavy loads are no longer visible from the outside (less sagging)
  • Shock absorbers will work in their optimum extension, therefore last longer

In the box

Airbags, Brackets, clamps, nuts & Bolts, Pipes with split conduit.
2x pressure gauges and T-piece air pipe fittings
Compressor with brackets and fixtures
2x paddle switches and gauges are supplied with a vehicle specific installation panel for the X250/290 cab.

Will installing VB SemiAir affect the vehicle warranty?

VB SemiAir is fully TUV tested and type approved for the Alko chassis (and all vehicles for which there is a VB SemiAir kit manufactured), as long as it is installed correctly it will not affect the vehicle warranty. If in doubt Conrad Anderson provide a professional installation service.