Categories

E&P Hydraulic Caravan Levelling - for any caravan

E&P Levelling system

E&P Levelsystem consists of 2 hydraulic jacks which are installed to the front of the caravans chassis along with 2 corner steady supports which are mounted to the axle of the caravan so when raised the whole width can be adjusted horizontally. 

Benefits:

  • Effortlessly level at the push of a button
  • Fully automatic level adjustment
  • Quick levelling - Less than 2 minutes
  • Sturdy and vibration-free position
  • Enables side to side levelling
  • Aditional theft protection
  • Reduces tire damage from long term storage 

Please note the E&P levelling system is available in 2 different kits please see below for more info.

Fitting Information:

Installation by Conrad Anderson only, price shown includes installation.

This item must be professionally fitted by Conrad Anderson.
(You will pay a 20% deposit of £595.00, with the rest payable upon fitting.)
£2975.00

E&P levelling systems

Caravan levelling standard (2 hydraulic jacks & corner steadies)
This E&P Levelling kit consists of 2 hydraulic jacks which are installed to the front of caravan along with the replacement of the vehicles original corner steadies with hydraulic ALKO 'big-foot' supports. This method prevents forces being transferred through the vehicle floor during setup. The system is operated with a 12 Volt hydraulic pump.

Caravan levelling ((2 hydraulic jacks, uses original corner steadies)
This E&P Levelling kit consists of 2 hydraulic jacks which are installed to the front of caravan, this system is ideal for use with your original corner steadies.

Even more variable

E&P caravan levelling keeps you mobile on-site. Forget messing around with jacks and wedges. Arrive, setup - holiday.

  • Horizontal in 120 seconds
  • Ready for immediate use
  • Fully automatic
  • Maintenance-free
  • Completely hydraulic
  • No wear and tear
  • Kind to frames
  • Easy setup

Even sturdier

With the E&P Levelsystem, 2 main supports are mounted to the axle of the caravan so that it is raised and the whole width can be adjusted horizontally. The standard corner steadies are replaced with hydraulic ALKO 'big-foot' supports. This method prevents forces being transferred through the vehicle floor during setup. The system is operated with a 12 Volt hydraulic pump.

Technical data

    For caravans/special trailers with max. total weight of 3.5t
    20 kg excess weight for the whole system / after dismantling the existing trailing supports
    Large, mobile pivoting support plate for axle supports
    Large, mobile pivoting support plate for corner supports (Alko Big Foot)
    240 Watt hydraulic aggregate
    12 Volt operating voltage