Conrad Anderson UK, Oyster, Vision, Digital, Oyster85V, Oyster85D

Maxview - Omnisat Portable (Elliptical Dish)

Maxview Award

There are various options as to the choice of satellite dish and mount, depending on where you wish to receive the signal, and whether you are after a fixed/permanent or a portable/temporary installation.

The Omnisat 66cm (B2566/LNB) Portable Dish Pack with the new elliptical dish, is the ideal solution for satellite reception whilst touring. The portable range of satellite dishes can be set up in a matter of moments, either fixed to a mast or on the Omnisat Tripod Stand (B2519N shown with dish).

The Omnisat66 is now equipped with a folding LNB arm for easier and even more compact storage.

Omnisat 66x80cm Portable Satellite Dish with Folding LNB Arm - (B2566/LNB)

Received 5 Star rating in Practical Caravan product review test!

To receive analogue or digital satellite signals when used with the respective compatible satellite receiver.
Solid elliptical 60x80cm diameter steel dish, with Universal LNB, 10m of coax cable and mast fixing accessories
Easy to use satellite zonemap for ease of dish alignment.

Satellite Dish with Folding LNB Arm

The Omnisat Tripod Stand (B2519/N)

Suitable for dish sizes up to 90cm in diameter with universal mast fixing.

For optimum positioning of the satellite system away from the vehicle.
Complete with ground pegs for additional stability.

Lightweight design that easily folds down to save storage space
Incorporates an extended upper mast section that rotates freely, this will make aligning a satellite dish even easier.

Accessories

To receive a clear picture, the dish must have the correct Vertical (Azimuth) and Horizontal Alignment. Vertical alignment, is the angle of elevation above the horizon whereas the Horizontal alignment of a dish, is the compass bearing the dish will need to point. Correct dish alignment can be helped with the use of the following items: The Omnisat Satellite Finding Compass (B2022) The Omnisat Sat-Finder (B2031) The Omnisat Tripod Stand (B2519/N) The kit also comes with a holdall for storage or travel (B2028)

The Omnisat Satellite Finding Compass (B2022)

The satellite will always be in the same position 28.2 degrees East of South.
The compass has an alignment window to help you locate your signal zone quickly and easily.
Suitable to use with all satellite systems.
Easy to follow instructions.

The Omnisat Sat-Finder (B2031)

Essential for locating your digital satellite signal.
Designed to help align the satellite dish to the required satellite, though a series of audible tones and LED lights.
Features a signal level control knob, which can be adjusted to fine tune satellite signal for different reception levels.
Designed for use with all satellite systems.

The Omnisat Holdall (B2028)

Holdall for storage or travel