GoldCruise CM30 Command Module

Conrad Anderson Home / Cruise Control Home / GoldCruise CM30 Command Module

GoldCruise CM30 COMMAND MODULE PROFESSIONAL RANGE CRUISE CONTROL
CM30 left or right handed stalk module. Deluxe stalk mounted command module on an adjustable ball joint. Functions: Fix speed and increase, memory and decrease, on/off. CM30 has the choice of a vacuum actuator/servo or electric actuator/servo and is suitable for most vehicles. Most vehicles require only a vacuum servo the two main exceptions are: a) vehicles with a 1.4 or below petrol engine, b) vehicles with hydromatic suspension. In these instances an electric actuator/servo, is fitted. Follow this link for Operating Instructions. Set-up, Trouble shooting guide and Diagnostics for the AP300/AP550 Base Units (manual and electric servos). (Low Resolution) Wiring Schematic for the AP300/AP550. High Resolution version. Set-up Flowchart for the AP300/AP550. See the user guides page for a full listing of cruise DIY fit and operating instructions.
Can also be used with the CM8 Memory Module to utilise pre-set speeds.

Cruise Control Range		Professional Range
Command Module		CM30
Command Module Style		stalk LH or RH
Servo Type		vacuum/electronic
Ignition sensing or tachometer		standard
Magnets on prop shaft		optional
Engine management unit or electronic speedometer		standard

Safety Features and Items
Mechanical clutch safety switch		optional
Electronic clutch safety switch		standard
Illuminated buttons		standard
LED light for cruise indication		standard
ON/Off Switch		standard
Automatically disengaged by brake pedal		standard
Automatically disengaged by clutch pedal		standard
Automatically disengaged by 15% speed change		standard
These cruise controls are fully TUV approved and are guaranteed for 1 year after purchase date.

HOW TO MAKE UP A PROFESSIONAL RANGE CRUISE CONTROL KIT

A 'Professional Range' cruise control kit is made up of the following components: 1. Base unit: actuator and computer. 2. Command module: for example, a stalk mounted on the steering column. 3. Mounting kit. What do I need to make up an aftermarket cruise control kit? 1. Choose an actuator: AP300, AP550 and the AP800. (this includes a computer or an interface according to the kit and a mounting kit). 2. Choose a command module: CM7, CM30L or CM30R, CMGK, CMIR or CM25 or 'Original Equipment' stalk. We stock only a Peugeot/Citroën stalk at present. More will be available soon. 3. See 'Which cruise for my vehicle' for further guidance if unsure. 4. Do you want us to install the kit? See our fitting page and map with directions. 5. Decide how to pay! Telephone 0800 279 0085 or email for queries. We have newly restructured our cruise section to accommodate new products. We apologise for any confusion or misunderstanding this might involve. Instead of having kits we have split them into individual products so that you the customer can pick and choose your kit depending on your vehicle.

PROFESSIONAL RANGE CRUISE CONTROL KITS

Within this range, we have a choice of 4 base units combined with a selection of 7 command modules. All the base units have a built in SETUP/LEARN mode that allows the user to adjust the major cruise parameters to optimise operation for that individual vehicle (Pulses / mile, reaction speed {x 40} and gain {x 40}). For a complete kit you will require an appropriate base unit (which includes the actuator, wiring loom and fitting kit) and a suitable command module (control unit). The latest actuator also requires a ‘T Harness’ telephone 0800 279 0085 for further details) . The electronic cruise units have a built-in diagnostic function enabling the installer to easily detect and solve problems without any special equipment or lengthy faultfinding.

The choice of base unit depends on the vehicle that it's being fitted on. All the base units are made to a very high standard having waterproof AMP connections for under bonnet situations.

AP300 Vacuum actuator: Ideal for vast majority of vehicles, petrol or diesel. Smaller body easy to mount in engine bay. Best value for money.

AP500 Electric actuator: NOW SUPERCEDED BY THE AP550. Any vehicle, great for vehicles with limited pedal travel on electric throttles or HGV's with no vacuum supply.

AP550 Electric actuator: Modified AP500 with 4 stroke lengths and variable cable length. Universal kit for easier fitting in awkward spaces.

AP800 Electronic actuator: Especially designed for ‘Drive by Wire’ vehicles. This unit requires a command module plus a plug-in pedal interface ‘T Harness’ which is vehicle specific. Saves time on fitting, no moving/wearing parts.

This range has a choice of either vacuum or electric actuator (servo) to cater for any vehicle. The system has a robust very sophisticated electronic control unit. This accepts speed sensing from a variety of sources such as the ignition coil, ‘W’ connection on the alternator, speedo or tacho drive, engine management unit or the drive shaft (front or rear wheel drive). It has full independent adjustment of both gain and initialisation rate settings. It also has a full built in self diagnostic mode to enable the installer to check out the fitting prior to road testing.

There are a variety of command modules available ranging from a dashboard or central console mounted CM7, the deluxe stalk mounted CM25 and the CM30 (LH or RH fitting), gear stick mounted CMGK or the steering wheel mounted infra-red controlled CMIR.

All of these have the possibility of adding a multiple memory unit to hold three preselectable speeds using the CM8. The Eagle Mechanical unit is a throttle-locking device with a brake safety ‘off’ switch. This allows you to take your foot off the throttle and relax for a very economic price. Ideal if you are on a tight budget. It has no speed feedback so there is a bit more adjustment required than on an electronic cruise control.