 |  |  |
 |  |  |
 |  |  |  |  |
 |  |
 |
 |
 |
 | |  | |
|
Printable version of this page
| Model & Description | Price
inc. VAT £ |
| CRUISE CONTROL SYSTEMS - PROFESSIONAL RANGE | |
| A 'Professional Range' cruise control kit is made up of the following components:
What do I need to make up an aftermarket cruise control kit? 1.
Choose an actuator: AP300,
AP550,
AP800. 2. Choose a command module: CM7, CM19L or CM19R, CMGK, CMIR or CM25 or 'Original Equipment' stalk. We stock only a Peugeot/Citroën stalk at present. More will be available soon. 3. See 'Which cruise for my vehicle' for further guidance if unsure. 4. Do you want us to install the kit? See our fitting page and map with directions. 5. Decide how to pay! Telephone 0800 279 0085 or email for queries. We have newly restructured our cruise section to accommodate new products. We apologise for any confusion or misunderstanding this might involve. Instead of having kits we have split them into individual products so that you the customer can pick and choose your kit depending on your vehicle. | |
| ACTUATORS (SERVOS) | |
|
AP300 Vacuum actuator (servo): ideal for vast majority of vehicles, petrol or diesel. Smaller body easy to mount in engine bay. Best value for money. |
200.00 |
|
AP500
SUPERCEDED BY THE AP550 Electric actuator (servo): suitable for any vehicle, great for vehicles with limited pedal travel on electric throttles or HGV's with no vacuum supply. |
was
260.00 |
|
AP550 Electric actuator (servo): modified AP500 with 4 stroke lengths and variable cable length. Universal kit for easier fitting in awkward spaces. |
280.00 |
|
AP800 Electronic actuator (servo): Especially designed 'Drive by wire' unit. Requires a T-Harness. | 280.00 |
| COMMAND MODULES | |
| CM7
(formerly
part of the ZT11M & ZT11ME kits) Dash mounted command module, back lit with cruise indication. |
35.00 |
| CM19L
(formerly part
of the ZT16M & ZT16ME kits) Left stalk mounted command module on an adjustable ball joint. | 45.00 |
| CM19R
(formerly part
of the ZT16M & ZT16ME kits) Right stalk mounted command module on an adjustable ball joint. | 45.00 |
| CMGK
(formerly
part
of the ZT17M & ZT17ME kits)
Gear stick command module, replaces the gear stick knob. |
75.00 |
| CMIR
(formerly
part
of the ZT18M & ZT18ME kits)
Infra-red command module, straps onto steering wheel in any position. |
75.00 |
| CM25
(formerly
part of the ZT25M & ZT25ME)
Stalk mounted command module with vacuum servo and nine integrated functions. Includes integrated memory module. | 85.00 |
| Peugeot
- Citroën Original equipment stalk for Peugeot/Citroën vehicles. | 98.00 |
| FITTING CHARGES - PROFESSIONAL RANGE | |
| CC-FIT Cruise control fitting. | 135.00 |
| THROTTLE LOCK - MECHANICAL | |
|
EAGLE
ECONOMIC - STANDARD |
39.95 |
| EAGLE
ECONOMIC - LONG CABLE VERSION | 49.95 |
| FITTING CHARGES | |
| Eagle Fitting | approx
95.00 |
| CRUISE CONTROL SYSTEMS - BASIC ELECTRONIC SERIES | |
| GC50
(formerly ZT50N) Dash mounted command module with full diagnostic's and on/off LED. |
149.95 |
| CRUISE CONTROL SYSTEMS - ACCESSORIES AND PARTS | |
| All
accessories and parts are available. Please ask if not shown below. The most commonly used ones are: | |
| CM8 3 memory add-on command module for professional series cruise. |
22.50 |
|
T-Harness Connector for electronic accelerator pedal. Vehicle specific. For use with the AP800. Please contact us for information. |
37.50 |
| CSW
(Clutch Safety Switch) A clutch safety switch may be required for vehicles with a manual gearbox. | 12.50 |
| SPG
(Speed Pulse Generator) Speed Pulse generator (universal fitting) for use on a mechanical speedometer. | 41.95 |
| MAGKIT Magnet kit for use on drive shaft speed sensing. |
12.50 |
| Canbus
interpreter, only required for vehicles with canbussed speed signals. Canbus Interpreters
are vehicle dependent, please phone. | 97.50 |
| Mercedes
Pedal Bracket - required for the AP300 & AP500 |
12.50 |
|
12.50 | |
|
12.50 | |
| ||||
| ||||
| ||||
| AP550 Electric Actuator | ||||
| AP800 Electronic Interface | ||||
| T-Harness List | ||||
| ||||
| CM8 Memory Module | ||||
| ||||
| Cruise fit on a Fiat Ducato | ||||
| Cruise fit on Discovery 3 | ||||
| Rik Whittaker fits Eagle | ||||
| Buying a Cruise Control Kit | ||||
| GoldCruise Feature | ||||
| Command
Module Functions | ||||
| Cruise Kit Feature | ||||
| Which Cruise? Feature | ||||
| ||||
| User Guides Home | ||||
 | ||||
 | ||||
| ||||
|
See
our Buying
guide.
See our GoldCruise features. 'Which Cruise?' will give you a better idea which cruise kit is suitable for your vehicle.
|
Conrad
Anderson provide a fitting service with
free electric hook-up & water.
Customers
wishing to stay overnight may do so.
See
the Fitting page
for details.
 |
Technical Helpline: 0870 872 2998
Telephone: 0121 247 0619 Fax: 0121 247 0974
Order products by telephone or fax or by using our order
form.
Opening
Hours: Monday - Friday 9.00 - 17.30 and Saturday 9.00 - 13.00.
