Cruise Control printable price list

Conrad Anderson Home / Cruise Control Home / Cruise Control Prices / Cruise Control Prices Printable

CRUISE CONTROL SYSTEMS
Model & Description	Price inc. VAT
SPEED LIMITER AND CRUISE CONTROL
GC90SL Driver Speed Limiting. Stand-alone Limiter, pre-set maximum speed only (not operated by the driver).	£210.00
Fitting GC90SL	£90.00
CRUISE CONTROL SYSTEMS - PROFESSIONAL RANGE
A 'Professional Range' cruise control kit is made up of the following components: 1. Base unit: actuator and computer. 2. Command module: for example, a stalk mounted on the steering column. 3. Mounting kit. What do I need to make up an aftermarket cruise control kit? 1. Choose an actuator: GC30, GC55, AP800 or GC90. (this includes a computer or an interface according to the kit and a mounting kit). 2. Choose a command module: GC1, GC3, GCIR or GC5 or 'Original Equipment' stalk. We stock only a Peugeot/Citroën stalk at present. More will be available in the future. 3. See 'Which cruise for my vehicle' for further guidance if unsure. Also refer to our guide: Vehicle Specific Cruise Control Kits 4. Do you want us to install the kit? See our fitting page and map with directions. 5. Decide how to pay! Telephone 0800 279 0085 or E-mail for queries. We have newly restructured our cruise section to accommodate new products. We apologise for any confusion or misunderstanding this might involve. Instead of having kits we have split them into individual products so that you the customer can pick and choose your kit depending on your vehicle.
ACTUATORS (SERVOS)
GC30/AP300 Vacuum actuator (servo): ideal for vast majority of vehicles, petrol or diesel. Smaller body easy to mount in engine bay. Best value for money.	£200.00
GC55/AP550 Electric actuator (servo): modified AP500 with 4 stroke lengths and variable cable length. Universal kit for easier fitting in awkward spaces.	£290.00
GC90 Electronic cruise control actuator, interfaces directly with the throttle pedal using a T-Harness.	£255.00
AP800 Electronic cruise control which interfaces directly with the throttle pedal using a T-Harness.	£255.00
GC90C Electronic cruise control actuator, interfaces directly with the throttle pedal using a T-Harness. Fully electronic combined cruise control & limiter with built in CANbus Interpreter.	£300.00
COMMAND MODULES
GC-1/CM7 Dash mounted command module, back lit with cruise indication.	£38.50
GC-IR/CMIR Infra-red command module, straps onto steering wheel in any position.	£85.00
GC-5/CM25 Stalk mounted command module with vacuum servo and nine integrated functions. Includes integrated memory module.	£85.00
GC-3/CM30 Left stalk mounted command module on an adjustable ball joint.	£60.00
CMPCIT Peugeot - Citroën Original equipment stalk for Peugeot/Citroën vehicles.	£115.00
FITTING CHARGES - PROFESSIONAL RANGE
GC90/AP800-FIT GC30 fit onto motorhomes. Cruise control fitting at workshop in Birmingham.	£135.00
GC30/GC55-FIT On all other vehicles Cruise control fitting at workshop in Birmingham.	£185.00
CRUISE CONTROL SYSTEMS - BASIC ELECTRONIC SERIES
GC50 (MS50) Dash mounted command module with full diagnostic's and on/off LED.	£150.00
CRUISE CONTROL SYSTEMS - ACCESSORIES AND PARTS
All accessories and parts are available. Please ask if not shown below. The most commonly used ones are:
CM8 3 memory add-on command module for professional series cruise.	£22.50
T-Harness - GCT420 Connector for electronic accelerator pedal. Vehicle specific. For use with the AP800 or GC90. Please contact us for information.	£75.00
T-Harness - All other vehicle Specific Connector for electronic accelerator pedal. Vehicle specific. For use with the AP800 or GC90. Please contact us for information.	£65.00
T-Harness - Universal For use with vehicles with no vehicle specific T-Harness available. For use with the AP800 or GC90. Please contact us for information.	£60.00
CSW (Clutch Safety Switch) A clutch safety switch may be required for vehicles with a manual gearbox.	£16.00
SPG (Speed Pulse Generator) Speed Pulse generator (universal fitting) for use on a mechanical speedometer.	£65.00
MAGKIT Magnet kit for use on drive shaft speed sensing.	£21.00
Canbus Canbus interpreter, only required for vehicles with canbussed speed signals. Canbus Interpreters are vehicle dependent, please phone.	£97.50
Merc Bracket Mercedes Sprinter Pedal Bracket - required for the GC30 & GC55	£16.00
Ducato Bracket Ducato JTD Pedal Bracket - required for the GC30 & GC55	£16.00
Transit Bracket Ford Transit Pedal Bracket - required for the GC30 & GC55	£16.00
Renault Bracket Renault Master Pedal Bracket - required for the GC30 & GC55	£16.00