| Dimensions |
Built
in dimensions (W x H x D): 520
x 745 x 505 mm (without door)
With standard frame: 4524 x 747 x 505
mm
With flush-mounted frame: 546 x 747 x 553 mm |
| Gross
capacity |
approx. 108 litres/10.2-litre freezer compartment |
| Voltage
|
12/24
volts DC |
| Average
power consumption |
approx. 50 watts |
| Current
consumption |
2.2 Ah/h at 25°C ambient temperature
2.5 Ah/h at 32°C ambient temperature
both at 5°C interior temperature and -18°C in the freezer compartment |
| Insulation |
CFC-free polyurethane foam |
| System |
Fully hermetic Danfoss BD35F compressor with integrated control electronics, low-voltage
protection, electronic fuse/automatic reverse pole protection, dynamically ventilated
wire condenser, mechanical, continuously variable thermostat |
| Material |
Stainless steel fittings, plastic interior, plastic door frame, body with coated
metal frame |
| Colour |
Body and door frame: silver, door panel: mat silver (brushed stainless steel appearance) |
| Weight |
approx.
28 kg |
| Quality
features |
Interior light, door with magnetic seal, variable door mounts and locks right/left,
door with double lock (top/bottom) and dual function (locking/ventilation), separately
insulated *** freezer compartment, additional, foamed rear-wall evaporator in
the interior, easy-to-change decor panel |
| Test
marks |
TÜV/GS, e-approved according to 95/54/EC (EMC guidelines for vehicles)
|
|
Notes
and features |
Normal refrigeration and *** deep-freezing Tropical-rated
(equivalent to ISO 7371)
Condensation drainage via hose connection or collection tank
Separately insulated *** freezer compartment 4 mounting points for fastening from
inside Standard
or flush-mount installation frame available as accessory Products:
CoolMatic CR-0110E
Standard installation frame for CR-110: EST-0110E
Flush-mount installation frame for CR-110: EFM-0110E Optional
extra:
Mains adapter 110 – 240 V › 24 V: MPS-35 |